Reviewed: 2016-10-25
Product Version:
AhsayCBS: 7.3.0.0 to 7.x
OS: All platforms
ATTENTION 1st January, 2022: v7 officially End-of-Life [details] ===== Description ===== This article contains instruction on how to start an AhsayCBS (in replication receiver mode) as a backup server (e.g. AhsayCBS in backup server mode).
===== Steps ===== Refer to the following steps to convert your AhsayCBS in replication receiver mode to a backup server:
Note : It is assumed that the first cycle of replication from the sender to the receiver had been completed.
-
Check on the Receiver's Setting.
Make note of the
Default Home Directory
and
Replication Home
settings.
-
On the AhsayCBS in replication receiver mode, login to the AhsayCBS web console.
-
Confirm on the replication receiver's settings.
Under
Replication
, select
Accepting Data
.
-
Check on the
Default Home Directory
setting, as well as the
Replication Home
setting.
Default Home Directory is where the replication sender's System Home, user settings, and configuration settings are stored (in the app folder).
Replication Home is the location where users' backup data and logs are stored.
For example purpose ( Step 1 example ), the following settings will be used:
Default Home Directory is set to C:\Program Files\AhsayCBS\system\rps\rcvshome\receiver
Replication Home is set to E:\Receiver Home
-
On the AhsayCBS in replication receiver mode, login to the AhsayCBS web console.
-
Configure the Software License.
-
On the AhsayCBS in replication receiver mode, login to the AhsayCBS web console.
-
Under
System Settings
, select
Licenses
, then apply the AhsayCBS license (the license from the AhsayCBS in backup server mode).
This will ensure that there are sufficient Client Software and Add-on Modules available to the backup users after the switch.
-
Press
Update
, then
Save
.
Ensure that the license information are properly applied by checking the Client Software and Add-on Modules settings under License Details.
Important : Before continuing on with the next step, ensure that the license is properly applied. Failure to do so may result in backup accounts being suspended and all backup settings being reset.
Also, ensure to shutdown the AhsayCBS in backup server mode, so that you are not running two servers with the same AhsayCBS license.
-
On the AhsayCBS in replication receiver mode, login to the AhsayCBS web console.
-
Convert the AhsayCBS in Replication Receiver Mode to Backup Server Mode.
-
Shutdown the AhsayCBS service.
Note : For AhsayCBS version 7.9.0.0 or above, shutdown the AhsayCBS and AhsayCBS NFS services.
-
Copy the replicated system config files to the corresponding location.
-
Extract the content of the conf.zip file from the
Default Home Directory
to the AhsayCBS installation conf folder.
Extract
%Default Home Directory%\app\conf\conf.zip
to
%AhsayCBS Install Home%\conf\*
Using the example in Step 1 , extract content of
C:\Program Files\AhsayCBS\system\rps\rcvshome\receiver\app\conf\conf.zip
to
C:\Program Files\AhsayCBS\conf
-
Extract the content of the conf.zip file from the
Default Home Directory
to the AhsayCBS installation conf folder.
-
Copy the replicated system home to the corresponding location.
-
Copy the replicated system home from the
Default Home Directory
to the AhsayCBS system home folder.
Copy
%Default Home Directory%\app\system\*
to
%AhsayCBS System Home%\*
Using the example in Step 1 , copy the content of
C:\Program Files\AhsayCBS\system\rps\rcvshome\receiver\app\system\*
to
C:\Program Files\AhsayCBS\system
Note : If you are planning to change the system home location, copy the replicated system home to the new system home location instead
-
Copy the replicated system home from the
Default Home Directory
to the AhsayCBS system home folder.
-
Copy the replicated user home to the corresponding location.
-
Copy the replicated user home from the
Replication Home
to the AhsayCBS user home folder.
Copy
%Replication Home%\%username%
to
%AhsayCBS User Home%\*
Important : Do not copy over the folder in YYYY-MM-DD-hh-mm-ss format.
Using the example in Step 1 , copy the content of
E:\Receiver Home\*
to
C:\Program Files\AhsayCBS\user
Note : If you are planning to change the user home location, copy the replicated user home to the new user home location instead
-
Copy the replicated user home from the
Replication Home
to the AhsayCBS user home folder.
-
Startup the AhsayCBS service.
Note : For AhsayCBS version 7.9.0.0 or above, startup the AhsayCBS and AhsayCBS NFS services.
-
Login to the AhsayCBS web console, confirm on the settings.
-
Confirm on the system settings.
Under
System Settings
, select
Basic
or
Advanced
.
Modify the System Home setting under System Settings > Basic if necessary (e.g. if you had copied the replicated system home to a new location in the previous step).
-
Confirm on the user and policy settings.
Under
Backup / Restore
, select
Users, Groups & Policies
.
Modify the User Home setting under Backup / Restore > Basic if necessary (e.g. if you had copied the replicated user home to a new location in the previous step).
-
Confirm on the system settings.
Under
System Settings
, select
Basic
or
Advanced
.
Note : For AhsayCBS installation on Linux platforms, the conversion procedure is the same except all directory paths are in the Linux convention. -
Shutdown the AhsayCBS service.
===== Keywords ===== obs, rps, replication, receiver, replicate, start, convert, change, converting, modifying, modify, cbs, rep