===== [V7] ISSUE: Replication traffic limit does not work when set to 0 Kb/s (data are still replicated) ===== Article ID: 5134
Reviewed: 2016-02-05

Product Version:
AhsayCBS: Pre-7.7.0.0
OS: All platforms ATTENTION 1st January, 2022: v7 officially End-of-Life [details] ===== Problem Description ===== Data are being replicated during time period with traffic limit set to 0 Kb/s.

For example, traffic limit is set for Monday 09:00 to 18:00 to 0 Kb/s:

===== Cause ===== This is a known issue with AhsayCBS version pre-7.7.0.0. ===== Resolution ===== To resolve the issue, patch the AhsayCBS application to version 7.7.0.0 or above. The instructions can be found by Clicking Here. ===== Keywords ========== ISSUE: Password complexity requirement missing after upgrading to AhsayCBS (User with password containing less than 6 characters can be created) =====
Article ID: 5135
Reviewed: 05/02/2016

Product Version:
AhsayCBS: Pre-7.7.0.0
OS: All platforms

===== Problem Description ===== After upgrading AhsayOBS from version 6 to AhsayCBS version 7.3.2.0 - 7.5.0.6, backup account with password containing less than 6 characters can be created in the AhsayCBS console.

Note: In previous version of AhsayOBS, a backup user's password must be at least 6 characters in length. The following error message is displayed if the requirement was not met when creating a backup account:


===== Cause ===== This is a known issue with AhsayCBS version pre-7.7.0.0.

By default, the password complexity requirement is not enabled for the [Default settings] policy group (policy group which applies to all backup accounts).

===== Resolution ===== To enable the password complexity requirement for all backup accounts:

  1. Login to the AhsayCBS console, select [Backup / Restore] > [Users, Groups & Policies]:


  2. Under the [Policy Group] tab, select [Default settings].


  3. Enable the [Password] switch under [User Settings].

  4. Modify the [Complexity Requirements] as required:


  5. Save afterward.


===== Keywords ===== pwd, password, insecurity, insecure, complexity===== ISSUE: Password complexity requirement missing after upgrading to AhsayCBS (User with password containing less than 6 characters can be created) =====
Article ID: 5135
Reviewed: 05/02/2016

Product Version:
AhsayCBS: Pre-7.7.0.0
OS: All platforms

===== Problem Description ===== After upgrading AhsayOBS from version 6 to AhsayCBS version 7.3.2.0 - 7.5.0.6, backup account with password containing less than 6 characters can be created in the AhsayCBS console.

Note: In previous version of AhsayOBS, a backup user's password must be at least 6 characters in length.
The following error message is displayed if the requirement was not met when creating a backup account:


===== Cause ===== This is a known issue with AhsayCBS version pre-7.7.0.0.

By default, the password complexity requirement is not enabled for the [Default settings] policy group (policy group which applies to all backup accounts).

===== Resolution ===== To enable the password complexity requirement for all backup accounts:

  1. Login to the AhsayCBS console, select [Backup / Restore] > [Users, Groups & Policies]:


  2. Under the [Policy Group] tab, select [Default settings].


  3. Enable the [Password] switch under [User Settings].

  4. Modify the [Complexity Requirements] as required:


  5. Save afterward.


===== Keywords ===== pwd, password, insecurity, insecure, complexity replicate, replication, replicating, rps, limit, band-width, bandwidth